Hi-5 Heat Transfer Vinyl

Free UK Standard Delivery

Our Siser Hi-5 is a thin premium quality super fast 5-seconds*, low-temperature heat transfer vinyl

Hi-5 can be used for a wide range of applications on to cotton, polyester, poly/cotton blends, performance wear, spandex & lycra. The 5-second low-temperature application is designed to prevent fibre damage and scorching to the garment

The product is REACH compliant
The product is certified Öko-Tex® Standard 100 Class I

*Heat Press required for 5-second application

No products found.

Cricut:	Silhouette Cameo:	Scan N Cut:
Blade: Standard	Blade: Standard, 3	Blade: Standard, 2
Setting: Iron-on	Material: Heat Transfer, Smooth	Cut Speed: 1
	Speed: 8	Cut Pressure: 1
	Force: 6

Roland GS/GX-24:	Graphtec:	MH, SC2, LP3, and Titan 1:	Titan 2 & 3:
Blade: 45°	Blade: 45°	Blade: 45°/60°	Blade: 45°/60°
Gram Force: 60-70	Gram Force: 9-10	Gram Force: 80-85	Gram Force: 60-65
Offset: .250	Tool: CB09U+0	Speed: 300mm/s	Speed: 300mm/s
Speed: 30 cm/s	Speed: 30 cm/s	*Blade Advancing Varies	*Blade Advancing Varies

*Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

EasyWeed Electric Applies to

100% cotton
Poly/cotton blends
100% polyester

Home Iron

Set iron dial on Cotton
Cover design with craft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Pre Heat your Garment for 2-3 seconds
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 10-15 seconds
IIf design is larger than the Iron, make sure to apply even time and pressure throughout the entire design
Peel carrier hot or cold

Heat Press

Cut in reverse
Weed excess material
Preheat garment for 2-3 seconds
Apply design at 120°C
Use medium pressure for 5 seconds
Peel carrier warm or cold

Washing

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Tumble dry on cotton cycle
Do not dry clean