Siser Easyweed Electric Heat Transfer Vinyls

Free UK Standard Delivery

Electrify Your Look with Unique Finishes

Take you're designing to a whole new level with EasyWeed Electric heat transfer vinyl, The colours are vibrant with a pearlescent metallic sheen and suitable for multi-layer detailed designs.
Suitable for application onto cotton, polyester and poly/cotton blends.

The product is REACH compliant
The product is certified Öko-Tex® Standard 100 Class I

No products found.

Cricut:	Silhouette Cameo:	Scan N Cut:
Blade: Standard	Blade: Standard, 3	Blade: Standard, 2
Setting: Iron-on	Material: Heat Transfer, Smooth	Cut Speed: 1
	Speed: 8	Cut Pressure: 1
	Force: 6

Roland GS/GX-24:	Graphtec:	MH, SC2, LP3, and Titan 1:	Titan 2 & 3:
Blade: 45°	Blade: 45°	Blade: 45°/60°	Blade: 45°/60°
Gram Force: 80-90	Gram Force: 8-9	Gram Force: 80-85	Gram Force: 60-65
Offset: .250	Tool: CB09U+0	Speed: 300mm/s	Speed: 300mm/s
Speed: 25-50 cm/s	Speed: 30 cm/s	*Blade Advancing Varies	*Blade Advancing Varies

*Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

EasyWeed Electric Applies to

100% cotton
Poly/cotton blends
100% polyester

Home Iron

Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 10-15 seconds
If areas of design lift after application, replace cover sheet
Peel carrier hot or cold

Heat Press

Cut in reverse
Weed excess material
Preheat garment for 2-3 seconds
Apply design at 305°F/150°C
Use medium pressure for 10-15 seconds
Peel carrier hot or cold

Washing

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean